Front Mounted High Speed Pneumatic Chuck With Three Jaws For Lathe Machines
1. Description
This kind of chuck is front mounted pneumatic chuck and is widely used in lathe, pipe thread machine tool and welding equipment. Because the connecting between the chuck and main shaft complies with the national standard(short cylinder connecting mode), there’s no need to change the structure of the lathe and just only prepare the matching flange which can connect to the chuck and machine tool when installing.
The whole installation process is quite easy. The chuck body is the cylinder, with piston and inverted valve inside to achieve super-long time pressure-keeping function (more than 24 hours). The clamping and loosing movement is achieved by rotary air inlet at the side. The machine will not work before cutting off the gas supply.
The apparent features of this chuck is light weight, big hole diameter, high stroke and high speed when rotating.
2. Performance Parameters
| Model number | BK160TQ |
| Claw stroke/diameter | 4.2mm |
| Max. clamping force | 28KN |
| Allowable pressure | 0.4-0.9Mpa |
| Limit speed | 2300r/m |
| Clamping range | 2-170mm |
| Net weight | 17.5KG |
3. Dimensions
| Specifications | D | D1 | D2 | D3 | d | H | H1 | H2 | z-d |
| BK160TQ | 175 | 219 | 142 | 130 | 35 | 138 | 103 | 66 | 3-M8 |
4. Advantages
| a. Full stroke design |
| b. Wide range of applications, diversification of processing profiles |
| c. High repetitive positioning accuracy |
| d. Low maintenance cost, long service life |
| e. Multiple configurations are available
e.1 Solid or hollow
e.2 Comb-type or mortise-groove type claws |
5. Production Line
